Friday, November 14, 2008

More aircraft drawings

Air 12

An illustration sample I did of a German Messerschmitt ME 109 in the war skies over Spain during their civil war in 1936. When doing this type of work accuracy is very important, I have a fairly extensive aircraft library that is essential for doing my research.

Air 12a

I adapted the illustration for one of my comic book cover parodies by scanning the drawing and adding color and the other elements to it on the computer.
The following drawings are a demonstration from my 1977 "Drawing In Ink" book.

Air 13

When starting an illustration I usually do a few small pencil sketches until I create an interesting, dramatic composition. For these preliminary sketches I usually have picked out specific views of the aircraft from reference books or photos that I happen to have.

Air 14

Once I establish the composition the next step is to do a tight pencil drawing with gray tones which will be used as a guide for the the final ink rendering.

Air 15

I begin the final rendering by first doing an accurate outline drawing on high quality illustration board using a technical pen with a ruler, triangle, French curves and oval guides.

Air 17

I start the inking process by painting in some of the solid black areas. Then I ink in most of the middle values using a crowquill pen, gradually building up the tones. At this stage the illustration is about half finished.

Air 16

To carefully rule in straight lines I use a ruler as a guide. This photo also gives you an idea of the size of the original drawing.

Air 18

This finished illustration was rendered on Whatman hot pressed illustration board, an excellent surface for this type of work.

Air 19jpg

A close up detail of a section of the illustration.

Air 20

Color can be added to black and white ink drawings by first having a film positive made of the art. Then a tracing of the art must be done on illustration board after which the color is added. The film positive must be positioned over your color art so that you can frequently check to see if the color values you are painting are correct. This color version was done for my 1979 book, "Art And Illustration Techniques"

Air 21

The ink line art was used for the cover of my book "Drawing In Ink", published in 1977. If you are interested in this book, used copies are still available at Amazon and other used book dealers. Shown here is the Japanese edition.

Wednesday, November 12, 2008

My fascination with airplanes

Air 1

Above is a page from a sketchbook when I was fourteen years old, a pencil drawing of a Curtiss P-40 in action. I loved drawing airplanes and was also an avid model builder.

Air 3

Another piece from 1942, an ink line crosshatch drawing of a P-40 of the American Volunteer Group known as the Flying Tigers who flew with the Chinese Air Force. Little did I know at the time that I would later specialize in this type of art. World War II was raging and these aircraft were always in the news.

Air 4

An ink and watercolor illustration of an North American SNJ-2 I did in 1942.

Air 6

I loved the way the Flying Tigers decorated their P-40 aircraft. This is one of my first attempts at working on Scratchboard, a specially coated illustration board on which you can do an ink drawing and then use a special tool to scrape in textures and lines. This unique illustration board is still available today.

Air 7

My first published art was in the May 1943 issue of Wings Comics which held a monthly contest to which readers could submit their aircraft drawings and designs.

Air 8

Here are some aircraft ink drawings that were a series of prints for Avitat, a division of Imperial Oil-Esso. The prints were given to their clients as part of an advertising promotion. The art director was Bob Pearson at Cockfield Brown in Toronto, the year was 1971. Back in 1962, when I worked with a group of freelancers in Detroit, Bob was our apprentice, years later he moved to Toronto. Bob visited me recently and brought back the original art used for these prints!

Air 9

Air 10

Air 11

These drawings were done on Whatman hot-pressed illustration board, a great surface for ink line work. The tough surface of this board can withstand the electric eraser in case you have correct any mistakes, a much better method than using white paint.

Air 11a

I recently adapted the above drawings to my series of comic book cover parodies which are done on the computer. I scanned the images, then added the type and color using Photoshop Elements 2.0

Air 12

Monday, November 10, 2008

Some of my toughest ink line assignments

6-1

Talk about a tough assignment ! My Chicago rep, Bob Witmer, brought in a series of ads for Jacobsen. You can't imagine what it's like to have to draw all these weird contraptions, even with good reference material. Again, my experience with automotive art proved very helpful. Often the client's product engineers scrutinize finished art for accuracy, so your drawings better be correct. One of the interesting things about this assignment was that these ads came in late in the year and the ad agency wanted to have the art costs put in the present year's budget rather then in the following year, so they paid me in advance for all the art ! This has got to be a first, I've never heard of this happening before or since.

6-2

Here are some close ups of the machines to give you a better idea of the detail involved. Even drawing the background ink lines to create a fairly flat tone was quite a chore

6-3

6-4

6-5

I also had to draw outline ink drawings of different machines and and their various components, not an easy task.

6-6

Another series of complicated machines done for International Harvester, again, an assignment out of Chicago brought in by my rep Bob Witmer.

6-7

These are a few of the smaller spot illustrations used in the ads.


6-8

Friday, November 7, 2008

A passion for line art

I produced a great deal of line art from the early 1960's through the 1970's. This medium has always been of interest to me, probably because of my fascination with comic strip art. Some of my favorite artists were Lou Fine, Noel Sickles and Milton Caniff, all were masters of the medium. To see some really beautiful line art search out the work of Victor De La Fuente and Sergio Toppi, they are both superb. Ink and pencil line art always seemed like such a challenge, and it certainly can be as you will see in future posts.

10-9

This is a pencil line drawing with an ink wash added. If I remember, I did a whole series of these, I don't recall the client or ad agency.

10-10

This rodeo scene was done as a sample for my reps to present to potential buyers at ad agencies, magazines and publishing houses. As a competing artist (it's tough out there !) you always should produce new samples whenever possible, you can bet that your competition is doing just that.

10-11

Throughout my career I have always managed to do a few comic strips.

11-1

Every once in a while a really tough assignment pops up, like this ad, one of a series done for Ekco. My automotive illustration experience is a great aid when confronting an illustration like this one. While freelancing in Detroit I also had out of town reps which brought me in a great deal of work from ad agencies and publishers. My rep in Chicago, Bob Witmer, landed this ad campaign for me.

11-2

Above is an illustration which was part of a series for Revere. This particular illustration was rejected by the art director and I had to redo it, the final ad is shown below. I personally still prefer the original version.

11-3

My rep in New York, Bill Neeley, nailed this series for me. The illustrations were complicated but still fun to do. Below are two more of the illustrations in this series. These were all inked on Whatman illustration board using a crowquill pen and a brush.

11-12

11-13

Wednesday, November 5, 2008

For many years I specialized in line drawings

Even when I was a kid I was always very interested in black and white ink drawings. This probably was the result of my interest in comic book art. It has always amazed me at what interesting work can be done with only a pen and ink.

7-1

One of a series of newspaper ads done for Armour Golden Star hams. The crosshatch ink line drawing was done using a crowquill pen and a brush.

7-2

An Autolite ad done for BBD&O in Detroit, the art director was Dave Mosora, one of my former students who is still a good friend of mine.

7-3

A series of ads done for International Trucks. Here I used a pencil and ink wash for this rather loose rendition of the truck.

7-4

An ink line drawing which creates a strong logo for Paul Scott Real Estate.

7-5

One of a series of newspaper ads for Kraft Orange juice. While freelancing in Detroit I had an excellent rep in Chicago. He was Bob Witmer a former high school buddy, we also worked together in Detroit art studios. Bob brought in the Kraft and Armour assignments and quite a few other interesting jobs.

7-6

This image shows how I create an ink line illustration. The first yellow area shows my initial basic line work. In the second orange area I ink in a couple of solid black areas then begin to add the gray tones. The next step is where I add the darkest tones. A simplistic diagram, but a good method to follow when doing line illustrations.

Monday, November 3, 2008

More exhibitions and comic book cover parodies

4-8 C.Smith

The Craig Smith Gallery in Harbert, MI had an exhibit of my acrylic figure studies in 2007, this is the poster I designed for the exhibition.

4-9 Fayettville

A good friend of mine from my Detroit illustration days was Bob Rector, an automotive artist who ended up living and painting in Fayetteville, NC. When Bob passed away his gallery, City Center Gallery and Books and the Fayetteville Museum of Art decided to have a memorial exhibition for him. I was invited to participate and this is the poster for the event.

4-10 Krasl

Here is another poster for the Krasl Art Center Text As Art exhibit. The art shown is actually a combination acrylic painting and a collage I did using prints created on the computer.

4-3Gallery posters

More gallery posters, the bottom two are for exhibitions of my Comic Book Cover Parodies. This is a series of limited edition prints that I have been working on for the last couple of years. When I was a kid I always wanted to be a comic book artist, my high school art teacher steered me into the commercial and fine arts. Through the years, however, I always managed to do a few cartoons and comic strips

4-4 Time Traveler/>

These comic book covers were all created on the computer. I usually do ink line drawings which I scan into the computer, compose the elements, then add the color and the type.

4-5 ManBat

Another cover, a take-off on Batman and Robin.

4-6 Comic Covs

Two more examples of the comic book covers. On the Dracula cover I adapted a line illustration that I had done for a Dracula book many years ago.